Announcing Doomseeker

(ST) Blzut3 · **Posted:** Sat Apr 18, 2009 3:34 pm

Announcing Doomseeker
Our new open, official, cross-platform browser

Doomseeker is a new cross platform browser maintained by Zalewa and Blzut3. Our goal is to provide all classic Doom players with a very fast, very smooth experience regardless of port or platform.

Fast. Play Skulltag in 2 seconds.
That's right, Doomseeker will query all 200 Skulltag servers in roughly 2 seconds. Doomseeker takes advantage of multi-threading to allow multiple servers to be queried at the same time, and the refreshing code is implemented intelligently, with performance in mind. The result? You no longer have to wait for the list to be slowly populated. Just start up and go.

Open. Not just for Skulltag.
We're fully receptive to other ports taking advantage of Doomseeker's ability and we'll go out of way to make it easy for them. In the next milestone, a plug-in architecture will allow any port author to quickly add support for this browser. What's more, the browser is open source and released under the GPL v2, so other port authors can build off of it.

Cross platform.
Developed with the Qt Toolkit, Doomseeker will run on most popular platforms including Linux, Windows (95 and later), and Mac OS.

Download

Windows (5.90MB)
Source Code (SVN)

Linux Compilation Instructions
Requirements:

G++
CMake version 2.4 or later
Qt4 development kit version 4.4 or later. If you are using Ubuntu 8.04 you must enable the hardy-backports repository or compile Qt yourself.
Subversion

On debian based systems these package can be downloaded with the following command:

Code:

$ sudo apt-get install cmake libqt4-dev subversion g++

Use subversion to checkout the source:

Code:

$ svn co http://skulltag.com/doomseeker/svn/trunk/ doomseeker

Run CMake and compile:

Code:

$ cd doomseeker
$ cmake .
$ make

If all goes well you should now have a doomseeker binary built.

Code:

$ ./doomseeker

Enjoy.

(st) Rivecoder · **Posted:** Sat Apr 18, 2009 7:33 pm

Great stuff, guys!

[SA] Dancso · **Posted:** Sat Apr 18, 2009 7:34 pm

Nice. Will country flags be added later on, or does that slow it down?

Duo Core Vulpeka · **Posted:** Sat Apr 18, 2009 7:45 pm

I'm going to watch this.

(ST) Blzut3 · **Posted:** Sat Apr 18, 2009 7:54 pm

Dancso wrote:

Nice. Will country flags be added later on, or does that slow it down?

It's not on the list of things to-do for version 0.2, but eventually yes.

Devil Hunter · **Posted:** Sat Apr 18, 2009 7:59 pm

The download is being slow. It stops, and goes at a really low speed... I'll check it out once I eva download it :meh:

[UD] Wartorn · **Posted:** Sat Apr 18, 2009 8:13 pm

Ooo, nifty :-D

[UD] Xenaero · **Posted:** Sat Apr 18, 2009 8:15 pm

Downloading now, if there's no pwad field to sort by, will that be included sometime?

This shit owns. I can't wait to see it pushed farther!

Devil Hunter · **Posted:** Sat Apr 18, 2009 8:29 pm

Heh, finally got it. Damn its fast. Now, if only it had getwad

Bishop · **Posted:** Sat Apr 18, 2009 11:49 pm

I always hated the server refresh time in IDE... this browser beats it any day

[UD] HeX9109 · **Posted:** Sun Apr 19, 2009 12:55 am

wicked sick

[Jetsons] esselfortium · **Posted:** Sun Apr 19, 2009 2:43 am

Awesome! Thanks for your work on this

<DRZ> /-]etor · **Posted:** Sun Apr 19, 2009 3:25 am

YEES! Can't wait to try it out! Hope I won't need to copy IPs from IDE anymore!

EDIT

Code:

-- Check for working CXX compiler: CMAKE_CXX_COMPILER-NOTFOUND
CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not found.   Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
CMake Error: Internal CMake error, TryCompile configure of cmake failed
-- Check for working CXX compiler: CMAKE_CXX_COMPILER-NOTFOUND -- broken
CMake Error at /usr/share/cmake-2.6/Modules/CMakeTestCXXCompiler.cmake:25 (MESSAGE):
  The C++ compiler "CMAKE_CXX_COMPILER-NOTFOUND" is not able to compile a
  simple test program.

  It fails with the following output:

   

  

  CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
  CMakeLists.txt:2 (project)


CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not found.   Please set CMAKE_CXX_COMPILER to a valid compiler path or name.
-- Configuring done

(ST) Blzut3 · **Posted:** Sun Apr 19, 2009 3:39 am

Added G++ to Linux requirements. That should fix your problem.

<DRZ> /-]etor · **Posted:** Sun Apr 19, 2009 3:44 am

Blzut wrote:

Added G++ to Linux requirements. That should fix your problem.

What is the package name to use with apt-get? Ok, found...

<DRZ> /-]etor · **Posted:** Sun Apr 19, 2009 4:07 am

[Reveal] Spoiler: old post

Code:

-- The CXX compiler identification is GNU
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Looking for Q_WS_X11
-- Looking for Q_WS_X11 - found
-- Looking for Q_WS_WIN
-- Looking for Q_WS_WIN - not found.
-- Looking for Q_WS_QWS
-- Looking for Q_WS_QWS - not found.
-- Looking for Q_WS_MAC
-- Looking for Q_WS_MAC - not found.
-- Found Qt-Version 4.4.3
-- Configuring done
-- Generating done
-- Build files have been written to: /data/doomseeker
hetor@HetorsLAB:~/doomseeker$ ./doomseeker
bash: ./doomseeker: No such file or directory

Ok, got it to work now. This is AWESOME!

I was shocked when I got the server list just in a second. Really awesome browser. All it's missing is a good alternative for GetWad :evilgrin:

EDIT: I also found that wad names are case sensitive, that is not good thing.

Zalewa · **Posted:** Sun Apr 19, 2009 4:29 am

/-]etor wrote:

EDIT: I also found that wad names are case sensitive, that is not good thing.

On the list Iwads are case sensitive but internally (this is before adding "-iwad" to the command line) they're lowercased. I don't know if the same thing should be done for pwads.

<DRZ> /-]etor · **Posted:** Sun Apr 19, 2009 5:25 am

Zalewa wrote:

/-]etor wrote:

EDIT: I also found that wad names are case sensitive, that is not good thing.

On the list Iwads are case sensitive but internally (this is before adding "-iwad" to the command line) they're lowercased. I don't know if the same thing should be done for pwads.

Well, if server uses gvh.pk3 and I have GVH.pk3, It prevents me from joining.

(st) submerge · **Joined:** Thu Mar 03, 2005 8:38 am **Posts:** 807

Hmm, so will this be replacing IDESE?

And it needs an icon. I suggest a Revenant since they fire seeker missiles. Doomseeker. Seeker missiles. Revenant. Get it?

WhiteRabbit · **Posted:** Mon Apr 20, 2009 2:47 pm

Great browser, the refresh speed is indeed fast!

I saw only one problem though (and it isn't a show stopper or anything). The categories tabs in the "configure" menu are editable:

[Reveal] Spoiler: Dialogue Box

Announcing Doomseeker

Who is online